China Mold Temperature Controller Supplier

Product Advantages

Real-time monitoring: equipped with a temperature sensor, real-time monitoring of the mold temperature, and feedback of temperature data to the control system of the mold temperature machine. The operator can intuitively see the real-time changes in the mold temperature on the control interface, so as to grasp the production status in time.

Automatic adjustment: The control system automatically adjusts the working state of the heating or cooling device according to the feedback temperature data and the set value. When the mold temperature is lower than the set value, the heating power is automatically increased; when it is higher than the set value, the cooling system is started or the heating power is reduced to keep the mold temperature within the set range.

Refrigerant circulation system: The liquid refrigerant in the evaporator absorbs the heat in the water and begins to evaporate.  Finally, a certain temperature difference is formed between the refrigerant and the water.  The liquid refrigerant also completely evaporates into the gas phase, and is then inhaled and compressed by the compressor (pressure and temperature increase).  After being throttled through the expansion valve (or capillary), low temperature and low pressure refrigerant enters the evaporator to complete the refrigerant circulation process.

System Introduction

Water circulation system: It is an cycle that chilled water from tank into the system by the circulation pump. And then the hot water from the system returns to the chiller. When the actual temperature is higher than the set temperature, the compressor start to work. Refrigerant system absorbs the heat load of the water.

Electrical automatic control system: Including power supply part and automatic control part. The power supply part is through contactor, compressor, fan, water pump supply power. Automatic control includes temperature controller, pressure protection, delay device, relay, overload protection and other mutual combination to achieve automatic startup and stop of the root temperature, protection and other functions. Monitors and regulates the chiller's operation to maintain desired temperatures.

Working Principle

Industrial Chiller is a kind of water cooling equipment, can provide constant water or water-glycol mixture temperature, constant current, constant pressure. Its working principle is to inject a certain amount of water into the tank of the machine first, through the refrigeration system to cool the water, and then by the pump to cool the low temperature cooling water into the equipment, the chilled water will take the heat away after the temperature rises and then return to the tank, to achieve the role of cooling. Cooling water temperature can be automatically adjusted according to requirements, long-term use can save water. Therefore, the chiller is a standard energy-saving equipment.

AQWK, as a professional supplier of Mold Temperature Controller in China, provides you with products of various specifications. Welcome to consult if you have any questions.